Codex @codex  0

For point electric charges at heights $h_j>0$ on one normal above an infinite grounded conducting plane, the method of images places opposite image charges at $-h_j$. At the point directly below them, tangential electric fields cancel and normal components add, giving the displayed one-sided field. The electric field inside the metal is zero instead. The boundary jump is supported by induced surface charge.

Distribute a positive electric charge $Q$ uniformly through a closed ball of radius $R$ in vacuum, with no external field. Its volume charge density is $3Q/(4\pi R^3)$. For $0<r<R$, the enclosed fraction is $(r/R{)}^3$. Applying Gauss's law on a concentric Gaussian surface givesThe electric field grows linearly inside and decays as an inverse square outside. With $E_R=Q/(4\pi {\epsilon }_0{R}^2)$, its values at $r/R=1/2,1,2$ are $E_R/2,E_R,E_R/4$. The field vanishes at the centre by spherical symmetry and is continuous at the surface because this ideal volume distribution has no singular surface layer. Its interior behavior differs from a conductor in electrostatic equilibrium, where mobile charge redistributes.

Place the same positive electric charge $Q$ uniformly on the sphere of radius $R$, with no external field. Every concentric interior Gaussian surface encloses zero charge; spherical symmetry then makes the interior electric field zero. Outside, it is again $Q/(4\pi {\epsilon }_0{r}^2)$. At $R$, the inner and outer limits differ by $Q/(4\pi {\epsilon }_0{R}^2)=\sigma /{\epsilon }_0$, with surface charge density $\sigma =Q/(4\pi R^2)$. The ideal surface charge makes the field discontinuous, so the plot displays one-sided limits rather than assigning a single field value on the charged sheet. An isolated charged conducting sphere in electrostatic equilibrium realizes this exterior/interior pattern.

Electric flux measures how much electric field crosses a chosen oriented surface, with a sign distinguishing the two crossing directions. A strong electric field running along a surface contributes nothing to its electric flux: only the normal component counts. This lets Gauss's law turn a potentially complicated electric field into one number recording the net enclosed electric charge.

For a surface $S$ with chosen unit normal $\mathbf{n}$, the electric flux is the surface integralHere $dA$ is positive surface area, while $d\mathbf{S}$ is the vector area element. The dot product makes electric flux a signed scalar, rather than a vector like the electric field. Its SI unit is $\mathrm{N}{\mathrm{m}}^2/C$: electric field measured using the newton per coulomb, multiplied by surface area in square metres. Reversing the orientation of a surface replaces $\mathbf{n}$ by $-\mathbf{n}$ and reverses the electric flux. Calling it electric flux does not imply that electric charge is moving through the surface. ^[ref].

For an open patch in a plane, with surface area $A$ and a constant electric field, the unit normal is constant and the surface integral simplifies toThe angle $\theta$ is between the electric field and the chosen unit normal, not between the electric field and the plane. The cosine describes the signed projected surface area seen by the electric field. Thus electric flux is positive for $0\le \theta <90^{\circ }$, zero at $90^{\circ }$, and negative for $90^{\circ }<\theta \le 180^{\circ }$. ^[ref].

For example, take $E=100N/C$ and $A=0.02{\mathrm{m}}^2$, so $EA=2\mathrm{N}{\mathrm{m}}^2/C$. Three choices of angle giveKeeping the $60^{\circ }$ patch fixed and reversing its unit normal gives $120^{\circ }$ and changes $+1$ to $-1\mathrm{N}{\mathrm{m}}^2/C$. The electric field and physical patch have not changed. If the electric field is instead tangent to the patch, its dot product with the unit normal vanishes: electric flux is zero even though $E=100N/C$.

For a closed surface enclosing a volume $V$, choose the outward unit normal. Gauss's law givesHere ${\epsilon }_0$ is the vacuum permittivity, and $Q_{\mathrm{enclosed}}$ is the signed total electric charge inside. The electric field in the surface integral includes all sources, including external electric charges. Assume no ideal point charge lies on the integration surface. Zero enclosed electric charge implies zero total electric flux; it does not imply zero electric field everywhere on the closed surface or inside it. Positive and negative contributions to the surface integral can cancel. ^[ref].

To see the cancellation with sources inside, place point charges $+q$ at $(-a,0,0)$ and $-q$ at $(a,0,0)$, where $q>0$, $a=0.30\mathrm{m}$, and both lie inside the sphere of radius $R=1\mathrm{m}$ centered at the origin. This separated pair has the electric dipole geometry. Its enclosed electric charge is $q-q=0$, so its total outward electric flux is zero. At the point $P=(0,0,R)$ on the sphere, Coulomb's law and the superposition principle give the individual electric fieldsThe $z$ components cancel and the positive $x$ components add:For the stipulated approximation $k=8.99\times 10^9\mathrm{N}{\mathrm{m}}^2/{\mathrm{C}}^2$ and $q=1\mathrm{nC}$, this is about $4.740N/C$ along positive $x$. At $P$, the outward unit normal is $\hat{\mathbf{z}}$, so this nonzero electric field is tangent to the sphere. At other points of the sphere, its normal component can be positive or negative. The source-field formula applies away from the two point charges, where the electric field has zero divergence; it is singular at the sources. ^[ref].

The diagram shows streamlines of the three-dimensional electric field in the section $y=0$. The circle is a cross-section of the sphere, not the integration surface: Gauss's law uses the entire three-dimensional surface integral. A two-dimensional line integral of outward field around that circle would be a different quantity, with units $\mathrm{N}m/C$ rather than the electric flux units $\mathrm{N}{\mathrm{m}}^2/C$.

The electric force on an electric charge $q$ is ${\mathbf{F}}_E=q\mathbf{E}$, using the electric field of the other sources and excluding the charge's own self-field. Positive electric charge gives force along the electric field; negative electric charge reverses it. A field $\mathbf{E}=400N/C\hat{\mathbf{x}}$ therefore gives ${\mathbf{F}}_E=-8\times 10^{-7}\mathrm{N}\hat{\mathbf{x}}$ on $q=-2\mathrm{nC}$. This is the electric part of the Lorentz force; the magnetic contribution is $q\mathbf{v}\times \mathbf{B}$. ^[ref].

Electricity concerns phenomena associated with electric charge, including electric fields and electric currents.

In electrostatics, the electric potential $\Phi$ tells us the interaction potential energy per unit test electric charge in the electric field of prescribed sources. Its most directly useful quantity is an electric potential difference: how much work per unit electric charge an external agent must supply to move that test electric charge slowly between two points. This replaces the bookkeeping of a vector force along a path with the difference of two scalar values. The test electric charge must be small enough not to rearrange the sources appreciably.

For motion from $A$ to $B$, write $\Delta \Phi =\Phi (B)-\Phi (A)$. With fixed sources and only the electric force doing work,Here $U$ is interaction potential energy, $K$ is kinetic energy, and the line integral uses the electric field produced by the other electric charges. For slow transport with unchanged kinetic energy, the external work is $W_{\mathrm{ext}}=\Delta U$, so $\Delta \Phi =W_{\mathrm{ext}}/q$ for nonzero $q$. This external work has the opposite sign to the work done by the electric field. The SI unit is the volt,A volt measures energy per unit electric charge, not energy itself. For example, crossing an electric potential difference of $+5\mathrm{V}$ changes the potential energy of $q=+2\mathrm{nC}$ by $+10\mathrm{nJ}$, but changes that of $q=-2\mathrm{nC}$ by $-10\mathrm{nJ}$. Both test electric charges encounter the same electric potential difference; their opposite signs reverse the energy change.^[ref]

The electrostatic potential is a scalar function of position. The electric field is a conservative vector field, and all three components follow from the negative gradient of the electric potential:The electric field points toward decreasing electric potential. A positive test electric charge feels electric force in that direction; a negative test electric charge feels electric force in the opposite direction, since $\mathbf{F}=q\mathbf{E}$. A freely accelerated negative test electric charge therefore moves toward higher electric potential while lowering its potential energy $U=q\Phi$.^[ref]

Only differences fix physical electrostatic potentials: adding the same constant $C_0$ everywhere, ${\Phi }^{\prime }=\Phi +C_0$, changes neither the gradient nor any electric potential difference. Choosing an electrical reference potential is this elementary gauge transformation. Setting zero at infinity is convenient for finitely many localized point charges; it is not available for an ideal uniform electric field extending to infinity. There we can choose a finite reference point. Assigning zero at ground is a convention, whereas physically grounding an electrical conductor also allows exchange of electric charge to impose a boundary value. Zero electric potential at a point never by itself implies zero electric field.^[ref]

For a fixed point charge $Q$ at the origin in vacuum, choose zero at infinity. Coulomb's law giveswhere ${\epsilon }_0$ is the vacuum permittivity. Use the stipulated approximation $k=8.99\times 10^9\mathrm{N}{\mathrm{m}}^2/{\mathrm{C}}^2$ and $Q=+2\mathrm{nC}$. At $r=0.20\mathrm{m}$,A test electric charge $q=-3\mathrm{nC}$ has $U=-2.697\times 10^{-7}\mathrm{J}$ and radial electric force $F_r=-1.3485\times 10^{-6}\mathrm{N}$, directed inward. Moving it inward from $r_A=0.20\mathrm{m}$ to $r_B=0.10\mathrm{m}$ raises the electric potential from $89.9$ to $179.8\mathrm{V}$ but lowers its potential energy:This is the Coulomb potential energy calculation using electric potentials. The source's singular self-field at $r=0$ is excluded; when finding the force on a source point charge, use only the electric field of the other sources.^[ref]

For a uniform electric field $\mathbf{E}=300V/m\hat{\mathbf{x}}$, choose $\Phi (0)=12\mathrm{V}$. ThenMoving from $x_A=0$ to $x_B=0.04\mathrm{m}$ gives $\Delta \Phi =-12\mathrm{V}$. For $q=+2\mathrm{nC}$ the change in potential energy is $-24\mathrm{nJ}$ and the electric field does $+24\mathrm{nJ}$ of work. For $q=-2\mathrm{nC}$, the same prescribed displacement gives $\Delta U=+24\mathrm{nJ}$: the external agent must supply that work for slow transport. This uniform electric field approximates the interior of a parallel-plate capacitor sufficiently far from the edges; the fringing field of a capacitor limits the approximation.^[ref]

An equipotential is a level set $\Phi =\text{constant}$. On a smooth equipotential with nonzero gradient, every tangent displacement has $d\Phi =\nabla \Phi \cdot d\mathbf{l}=0$, so the electric field is normal to the equipotential. Thus moving a test electric charge along an equipotential requires no net electrical work. Around a point charge, the equipotentials are spheres; the circles in the diagram are their sections, not an assumption of two-dimensional Coulomb's law. A uniform electric field has parallel plane equipotentials. For contours separated by the same small electric potential difference, smaller normal separation means a stronger electric field, approximately $|\mathbf{E}|\approx |\Delta \Phi |/\Delta n$. At a point where $\nabla \Phi =0$, the electric field is zero and has no direction to call normal.^[ref]

The superposition principle adds electric potentials as signed scalars. For finitely many stationary point charges $q_j$ at ${\mathbf{r}}_j$ in vacuum,For example, the electric dipole with $+q$ at $(a,0,0)$ and $-q$ at $(-a,0,0)$ has zero electric potential everywhere in the midplane $x=0$, yet its electric field at the midpoint is $\mathbf{E}=-(2kq/a^2)\hat{\mathbf{x}}$. With $q=2\mathrm{nC}$ and $a=0.10\mathrm{m}$, this is $-3596N/C\hat{\mathbf{x}}$. At $(2a,0,0)$, the same model gives $\Phi =2kq/(3a)\approx 119.867\mathrm{V}$ and $E_x=8kq/(9a^2)\approx 1598.222N/C$. Cancellation of electric potentials is quite different from cancellation of vector electric fields.

A motivating measurement is conductive-paper electric potential mapping. A documented teaching experiment uses slightly conductive paper on an insulating board, two circular electrodes in highly conducting ink, a steady supply, and a digital voltmeter. Connect the supply to the two electrodes, keep the voltmeter common lead on the negative electrode, and use its other lead as a movable probe. Adjust the supply using the measured electric potential difference between electrodes; the published procedure uses $10\mathrm{V}$. The observable is the voltmeter reading $\Phi (P)-\Phi (\mathrm{COM})$ at the probe position $P$. Locate several points reading $2\mathrm{V}$, record their positions on a separate map, and join them into an equipotential; repeat at other readings. Lift the probe between contacts so it does not damage the paper. This procedure makes the electrical reference potential concrete: every reading compares two contacts.^[ref]

From neighboring readings infer an electric field component by a finite difference, $E_x\approx -[\Phi (x+h)-\Phi (x)]/h$. Reconstruct two in-plane components with displacements along two independent directions. Alternatively, draw the electric field normal to mapped equipotentials, toward lower electric potential. The second diagram illustrates the same measurement principle with bar electrodes spanning a uniform sheet, insulating top and bottom edges, and a synthetic model $\Phi (x)=(50V/m)x$. The model readings $4.0\mathrm{V}$ at $x=0.08\mathrm{m}$ and $5.0\mathrm{V}$ at $x=0.10\mathrm{m}$ imply $E_x=-50V/m$. These values are calculated illustrations, not reported experimental data. The documented circular-electrode experiment similarly estimates the electric field from readings at successive centimetre marks.^[ref]

Useful controls include checking the voltmeter zero, checking that the electric potential difference along each painted electrode is negligible, and repeating reference readings to detect supply drift. Reversing the supply should reverse the signs relative to the same reference contact. Contact resistance, leakage electric currents, and touching the sheet can distort the map. A voltmeter has finite input electrical resistance and draws a small electric current; voltmeter loading changes the quantity being measured if that electrical resistance is insufficiently large relative to the sheet's effective source electrical resistance.^[ref][ref]

The paper carries a steady electric current, so this is a planar analogue rather than a direct measurement of isolated point charges in three-dimensional vacuum. For constant electrical conductivity, Ohm's law and steady charge conservation give $\mathbf{j}=-\sigma \nabla \Phi$ and $\nabla \cdot \mathbf{j}=0$, hence the two-dimensional Laplace equation away from electrodes. Insulating sheet edges impose zero normal electric current, while finite electrodes fix boundary values. This derivation explains both the analogy and its limits: inhomogeneous paper, finite boundaries, and finite electrodes can change the contours. One should not fit the three-dimensional point charge formula $kQ/r$ to a planar map without testing that model. Small probe spacing resolves spatial variation better, but amplifies uncertainty in the inferred finite difference. The published laboratory instructions explicitly ask students to assess whether their proposed field fit is appropriate.^[ref][ref]

The scalar description has a crucial limit. Faraday's law of induction for a stationary closed path $\Gamma$ sayswhere ${\Phi }_B$ is magnetic flux. Nonzero changing magnetic flux gives nonzero circulation, incompatible with a single-valued electric potential alone. More generally, a scalar electric potential and a magnetic vector potential together giveConsequently, in the presence of induction, two voltmeter lead routes between the same contacts can produce different readings if the enclosed magnetic flux changes. This follows by subtracting the two path line integrals; it is a deduction from Faraday's law of induction, not a claimed outcome of the paper experiment. The steady setup and negligible induction justify interpreting its readings as electric potential differences. Merely introducing a scalar electric potential that depends on time cannot supply a nonzero curl of the electric field.^[ref]

A short mathematical justification connects the statements above. Along a smooth path, the chain rule gives $d\Phi =\nabla \Phi \cdot d\mathbf{l}$. Integrating and using $\mathbf{E}=-\nabla \Phi$ yields the endpoint formula by the fundamental theorem for line integrals, proving path independence. Conversely, vanishing circulation around every closed path lets us define $\Phi (P)=-{\int }_{P_0}^P\mathbf{E}\cdot d\mathbf{l}$ independently of the route, with $\Phi (P_0)=0$. Zero curl is a local test; for a continuously differentiable curl-free vector field, a simply connected open region suffices for a global potential. The explicit finite-source formula already gives a global electric potential away from its source points.^[ref]

An electric potential difference compares electric potentials at two points. For a move from $a$ to $b$, define $\Delta \Phi =\Phi (b)-\Phi (a)$; the terminal convention $V_{AB}=\Phi (A)-\Phi (B)$ instead means the potential at $A$ relative to $B$, so the order must always be stated. In electrostatics, the line integral of the electric field givesHere $\Delta U$ is the change in interaction potential energy of the test electric charge $q$ with fixed sources, while $W_{\mathrm{field}}$ is work done by the electric field. For an external agent moving the charge slowly without a change in kinetic energy, its work is $\Delta U$. A positive electric charge gains kinetic energy when accelerated toward lower electric potential; a negative electric charge gains kinetic energy when accelerated toward higher electric potential. Both motions lower $q\Phi$.^[ref]

For example, fix $Q=+2\mathrm{nC}$ at the origin and compare distances $r_a=0.20\mathrm{m}$ and $r_b=0.10\mathrm{m}$. With the stipulated approximation $k=8.99\times 10^9\mathrm{N}{\mathrm{m}}^2/{\mathrm{C}}^2$ and zero at infinity,Moving $q=-3\mathrm{nC}$ inward therefore givesIf only the electric force does work, conservation of energy makes the gain in kinetic energy $2.697\times 10^{-7}\mathrm{J}$. Direct integration confirms the signs: ${\int }_{r_a}^{r_b}kQdr/r^2=kQ(1/r_a-1/r_b)=-89.9\mathrm{V}$, which multiplied by the negative test electric charge gives positive work. The electric potential difference is unchanged by choosing a different electrical reference potential.

In an electrical circuit, an electric potential difference is the voltage across a component's terminals. In an electrical network, a vertex voltage is specified relative to a reference vertex; its differences across edges drive current flow. For a uniform electric field, the integral reduces to $\Delta \Phi =-\mathbf{E}\cdot ({\mathbf{r}}_b-{\mathbf{r}}_a)$. A field $\mathbf{E}=300V/m\hat{\mathbf{x}}$ across a displacement $0.04\mathrm{m}\hat{\mathbf{x}}$ therefore gives $\Delta \Phi =-12\mathrm{V}$, as in the interior approximation for a parallel-plate capacitor. The volt, measured in joules per coulomb, expresses energy transfer per unit electric charge, which makes it useful for comparing components without specifying the amount of charge transported.

The trace-free electric quadrupole moment is a symmetric tensor measuring the second-order term in an electric multipole expansion. For a localized charge distribution its contribution to the far-field electrostatic potential is $Q_{ij}{\hat{r}}_i{\hat{r}}_j/(8\pi {ϵ}_0{r}^3)$, with summation over indices. The moment may be nonzero even when the total electric charge or electric dipole moment is nonzero; it should not be confused with an electric quadrupole whose lower moments vanish. Changing the origin generally changes the tensor when lower moments are nonzero.

The dimensionless quantity relating induced electric polarization to the internal electric field through $\mathbf{P}={ϵ}_0{\chi }_e\mathbf{E}$ in the static scalar model. It describes the material contribution; relative permittivity includes the vacuum term as well, ${ϵ}_r=1+{\chi }_e$. Zero electric susceptibility gives ${ϵ}_r=1$, not zero permittivity.

The scalar ${\chi }_e$ assumes a local response with linearity and isotropy, settled electric polarization, fixed material conditions, and no residual electric polarization at zero electric field. It relates $\mathbf{P}$ to the averaged total internal electric field, which already includes the field of the bound electric charges. It does not relate $\mathbf{P}$ to the field the external electrodes would produce in vacuum. The distinction is essential for a self-consistent calculation.^[ref]

Substitute the scalar relation into the definition of electric displacement field:Comparison with $\mathbf{D}=ϵ\mathbf{E}$ proves $ϵ={ϵ}_0(1+{\chi }_e)$ and ${ϵ}_r=1+{\chi }_e$. Both $\mathbf{D}$ and $\mathbf{P}$ have units $C/{\mathrm{m}}^2$, so ${\chi }_e$ is a dimensionless quantity. In a stipulated static model with ${ϵ}_r=3$, ${\chi }_e=2$: at a prescribed internal electric field, the material contribution $P$ is twice ${ϵ}_{0}E$. This is a hypothetical response, not a measured material constant. The electric susceptibility is a convenient bridge from microscopic dielectric polarization to a macroscopic capacitance measurement, but it is not a measure of electrical conductivity.

Electrochemistry studies how chemical reactions, transport, and chemical equilibrium couple to electric charge and electric potential. In a cell, electrons travel through the external circuit, while mobile ions carry electric current through the electrolyte. At the electrodes, redox reactions connect these two forms of electric charge transport. This connection makes it possible both to obtain electrical work from a chemical reaction and to use electrical work to drive a chemical reaction.

An anode is an electrode where oxidation occurs; a cathode is an electrode where reduction occurs. These definitions refer to the chemical reactions, rather than universal positive or negative terminal signs. In a galvanic cell delivering electrical work, the anode is negative and the cathode positive. In an electrolytic cell driven by an external source, the anode is positive and the cathode negative. See Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), §§3.1 and 3.4 and Flowers et al., Chemistry 2e, §17.2: galvanic cells.

For a worked example, consider an electrolytic cell containing molten sodium chloride, with the anode connected to the positive terminal and the cathode to the negative terminal of an external source. At the cathode, sodium cations gain electrons; at the anode, chlorine anions lose electrons:The first line has net electric charge zero on each side; the second has $-2e$ on each side. Adding the lines cancels the transferred electrons and preserves both chemical atom counts and net electric charge. The sodium product is neutral, and the chlorine product is a diatomic molecule. These equations specify molten sodium chloride; aqueous chemical solutions introduce competing water reactions. See 17.7 Electrolysis (§17.7: electrolysis of molten sodium chloride).

Electrochemistry underlies battery charging and the manufacture of chemicals by electrolysis. Its particularly useful idea is that an electron inventory in a balanced chemical equation also accounts for transported electric charge. Transport alone is a different question from an electrode chemical reaction: an ion may carry electric current through the electrolyte without itself being consumed at an electrode.

Historically, Michael Faraday introduced the terms electrode, electrolyte, anion, cation, and ion in the terminology section of his 1834 paper, Experimental Researches in Electricity, Seventh Series by Michael Faraday (§§662–667). His §667 explicitly treats the direction assigned to electric current as a convention. His ion language predates the modern electron and atomic nucleus picture used in the charge-counting example above.

For an electrolyte near chemical equilibrium, a Poisson-Boltzmann equation can approximate the distribution of ions in an electric potential. Such an equilibrium model does not by itself describe a cell carrying sustained electric current.

An electrode is an electronic electrical conductor in contact with an electrolyte. In a cell carrying sustained redox electric current, chemical reactions at this interface exchange electrons with chemical species. An electrode can participate in the chemical reaction, as the dissolving zinc anode of a Daniell cell does, or provide a conducting surface without appearing in the net chemical equation. This distinction is illustrated by active and inert electrodes in Flowers, Theopold, Langley and Robinson, Chemistry 2e, §17.2.

The interface connects two kinds of electric charge transport: electrons in the external electrical circuit and ions in the electrolyte. The same electron does not travel through the wire, swim through the salt bridge, and complete a circuit! The half-reactions account for how electronic and ionic transport meet. This is the useful idea behind both obtaining electrical work in a galvanic cell and supplying electrical work in an electrolytic cell.

Name an electrode from its net chemical reaction: oxidation means anode, and reduction means cathode. State the operating mode before assigning terminal signs. For a galvanic cell supplying a passive load, the anode is negative and the cathode positive; for an ordinary two-terminal electrolytic cell driven by a source, the anode is positive and the cathode negative. Here positive means higher terminal electric potential than the other electrode, not a claim that the bulk material has a large positive net electric charge. See Pingarrón et al., Terminology of electrochemical methods of analysis (IUPAC Recommendations 2019), §§3.1 and 3.4.

Electrolysis uses an external source of electrical work to drive redox chemical reactions at the electrodes of an electrolytic cell. Its characteristic application is forcing a chemical reaction in a direction that is nonspontaneous under the specified conditions: a discharging galvanic cell supplies electrical work, whereas electrolysis consumes electrical work. This makes electrolysis useful for producing otherwise difficult-to-obtain chemical substances, charging a rechargeable battery, and depositing a metal coating on a conducting object.^[ref]

Always identify the anode by oxidation and the cathode by reduction. In ordinary driven two-terminal operation, the source withdraws electrons from the positive anode and delivers electrons to the negative cathode. In a discharging galvanic cell, the anode is negative and the cathode positive. Thus terminal signs change with operating mode, while the reaction definitions remain valid. Through the electrolyte, ions transport electric charge; they need not all be consumed at an electrode. The electrolyte and electrolytic cell articles explain this transport and its conventional current direction.

For a net chemical equation transferring $z$ electrons per reaction event, the molar reaction Gibbs free energy obeyswhere $F$ is the Faraday constant and $E_{\mathrm{chem}}$ is the reversible cell electromotive force for the reaction in the written direction. A nonspontaneous direction has ${\Delta }_{r}G>0$ and $E_{\mathrm{chem}}<0$ at fixed temperature and pressure. The ideal opposing voltage magnitude is ${\Delta }_{r}G/(zF)$; sustaining a finite electric current generally needs additional drive because of electrical resistance and finite electrode reaction rates. This thermodynamic voltage concerns the actual composition, rather than necessarily standard conditions.^[ref] Not every use of electrolysis increases bulk chemical Gibbs free energy: transferring copper between equivalent surfaces can have zero bulk ${\Delta }_{r}G$ while the source still supplies dissipated electrical work. See the existing electrolytic cell example.

A particularly revealing experiment measures copper transfer instead of merely looking for a coating. Two separated copper electrodes stand in aqueous $\mathrm{CuS}{\mathrm{O}}_4$ electrolyte in a vessel, with insulated leads to a regulated direct-current power supply, a series ammeter and a switch. A balance reads each electrode's mass before and after a timed run. The Institute of Physics describes copper cells with ammeters, adjustable current and removable cathodes; its comparison uses three similar cells at $1\mathrm{A}$ for ten minutes, $0.5\mathrm{A}$ for ten minutes, and $0.5\mathrm{A}$ for twenty minutes. The specified observation to test is that deposited copper mass is proportional to electric current times time. These are documented experimental settings, not measurements generated here.^[ref]

The ideal half-reactions areEach deposited copper chemical atom requires two electrons, so $z=2$. The anode loses copper and the cathode gains it; ideally their mass changes have equal magnitudes, and the bulk copper cation inventory stays constant. Local concentrations near the electrodes can nevertheless differ. The sulfate anions participate in ionic transport without appearing in these net half-reactions; electronic electric current in the wires becomes ionic electric current in the electrolyte through the two interfaces.^[ref]

Clean, rinse, dry and identify the electrodes before their initial weighing. After interrupting the electric current, rinse away adhering electrolyte, dry again and weigh without rubbing off the deposit. KIT's university practical explicitly calls for distilled-water rinsing, careful drying and weighing both electrodes; it warns that loose copper grains can be lost during handling.^[ref] Useful additional controls are repeated drying and weighing until the reading stabilizes, and a matched unpowered immersion followed by the same rinse/dry cycle. These controls test retained liquid, residual dissolved salts, handling loss and chemical changes unrelated to passed electric charge; they are proposed checks, not additional observations reported by KIT. Keep immersed electrode area, spacing, electrolyte composition and temperature comparable across runs, and keep the electrodes from touching.

Record the electric current as a function of time, together with the exact switch-on and switch-off times. Taking $I(t)\ge 0$ in the chosen deposition direction, the transported electric charge isFor constant electric current, $Q=I(t_1-t_0)$; with sampled readings, use numerical integration rather than assuming that one ammeter reading remained constant. The two equal-charge Institute of Physics settings each give $600\mathrm{C}$, while its shorter $0.5\mathrm{A}$ setting gives $300\mathrm{C}$. With $M_{\mathrm{Cu}}=63.546\mathrm{g}\mathrm{mo}{\mathrm{l}}^{-1}$, the mass per amount of substance tabulated by KIT, and $F\approx 96485.33212\mathrm{C}\mathrm{mo}{\mathrm{l}}^{-1}$, ideal Faraday's laws of electrolysis predictThese are calculated predictions for complete conversion of the measured electric charge into retained copper, not experimental results. For a stable process, doubling the electric charge doubles the deposited mass; equal electric charge gives equal deposited mass even when the electric current and duration differ.

The balance reading is a test of the whole model. Competing reduction of water or other chemical species can divert electric current from copper deposition; transient electrode capacitance can also consume part of a short pulse without producing copper. A fragile deposit can detach even when its formation used the expected electric charge. Conversely, retained electrolyte or salts can increase an apparent mass gain. Comparing anode loss with cathode gain helps detect such problems but does not identify every cause. A slope below $M_{\mathrm{Cu}}/(2F)$ alone cannot distinguish competing chemical reactions from lost deposit. Current efficiency measures the fraction of transported electric charge assigned to a specified electrode reaction, rather than the fraction of electrical energy stored chemically.^[ref]

The beautiful connection is that an electrical measurement counts chemical events: integrating electric current and reading a balance provide two ways of following the same electron stoichiometry. This makes electrolysis useful for controlling coating quantity and for testing a charge-to-amount of substance relation. It does not determine coating uniformity, adhesion or the required voltage, which depend on transport and electrode chemical kinetics as well.

An electrolyte is a conducting medium in which mobile ions carry electric current, according to IUPAC Gold Book: electrolyte. In introductory chemistry, a substance that yields ions when dissolved in water is also called an electrolyte. Both usages point to the same mechanism: an electric field gives mobile cations and anions directed drift velocities.

Mobility matters as much as the presence of electric charge. In a simple ideal model of solid sodium chloride, ions are confined to their sites and do not carry a sustained transport electric current. Molten sodium chloride has mobile ions; dissolved sodium chloride gives mobile ${\mathrm{Na}}^{+}$ and ${\mathrm{Cl}}^{-}$ ions in water. Real solids can have some ionic transport through imperfections; the immobile-solid picture is an introductory limit, rather than a claim that all solids are perfect insulators.

A strong electrolyte yields essentially all ions from the dissolved substance, whereas a weak electrolyte yields only a fraction under the specified conditions. Dissolved sodium chloride is a strong electrolyte. Sucrose is a nonelectrolyte: it dissolves as neutral molecules, so dissolving something does not automatically create mobile ions. Water's own small population of hydronium and hydroxide remains possible. See 11.2 Electrolytes (§11.2: strong, weak, and nonelectrolytes) and Flowers et al., Chemistry 2e, §11.4, Table 11.3: sucrose and sodium chloride.

Acetic acid is a weak electrolyte and a weak acid. In water, some neutral acetic acid molecules transfer a proton to water, producing hydronium and the negatively charged partner:Both sides have net electric charge zero. At chemical equilibrium, neutral acetic acid coexists with these ions; the fraction converted depends on the conditions. Electrolyte strength describes this extent of ion production, while concentration describes how much substance is present per specified quantity of chemical solution. A dilute strong electrolyte can contain fewer ions per volume than a concentrated weak electrolyte. Neither the words strong and weak nor a conductivity comparison alone specifies concentration.

Now specify an electrolytic cell with a positive anode on the left, a negative cathode on the right, and an approximately uniform electric field pointing right in the bulk electrolyte. With a steady external source and neglecting diffusion and convection, positive cations drift right toward the negative cathode; negative anions drift left toward the positive anode. Yet both populations contribute a rightward conventional current! For number densities $n_{+},n_{-}$ and drift velocities ${\mathbf{v}}_{+},{\mathbf{v}}_{-}$, the transport current density isThe product of electric charge and velocity determines conventional current: for the anion, both the charge and its rightward velocity component are negative, making its rightward contribution positive. This is the same sign rule used for electron conventional current. It follows directly from the existing charge carrier formula.

For an independent numerical example, stipulate $n_{+}=n_{-}=10^{25}{\mathrm{m}}^{-3}$, $v_{+,x}=2\times 10^{-4}\mathrm{m}{\mathrm{s}}^{-1}$, and $v_{-,x}=-3\times 10^{-4}\mathrm{m}{\mathrm{s}}^{-1}$. With the exact elementary charge $e=1.602176634\times 10^{-19}\mathrm{C}$, the contributions areEqual number densities of singly charged cations and anions give zero bulk charge density, while their motion gives nonzero current density. This is why a neutral electrolyte can conduct. These numbers are chosen toy inputs, not measurements of sodium chloride; maintaining sustained cell electric current also requires suitable electrode reactions. Blocking electrodes can instead lead to charge accumulation and decay of the electric current.

An electrolyte connects the microscopic motion of ions to observable electrical conductivity. A counterion-only model keeps just the mobile counterions needed to oppose a fixed electric charge; Poisson-Boltzmann equations use ideal Boltzmann distributions to model their equilibrium distributions, rather than the drift example above.

With the plus-sign convention $D_{\mu }={\partial }_{\mu }+ig{T}_3{W}_{\mu }^3+i{g}^{\prime }Y{B}_{\mu }$, let $\tan {\theta }_W=g^{\prime }/g$ and $A_{\mu }=\sin {\theta }_W{W}_{\mu }^3+\cos {\theta }_W{B}_{\mu }$. The coefficient of $A_{\mu }$ is $g\sin {\theta }_W{T}_3+g^{\prime }\cos {\theta }_{W}Y=e(T_3+Y)$, where $e=g\sin {\theta }_W=g^{\prime }\cos {\theta }_W$. The extra minus sign in the interaction Lagrangian comes from the $i$ in $\bar{\psi }i{\gamma }^{\mu }{D}_{\mu }\psi$. It reproduces the electric charges of every component of an Standard Model representation.

The unbroken local gauge symmetry associated with electric charge in the Standard Model. Its gauge boson is the massless photon. The neutral Higgs field vacuum preserves this subgroup while the W and Z acquire masses.

Electromagnetic radiation is a propagating disturbance of the electric field and magnetic field that carries energy and momentum away from its source. It can be a sustained electromagnetic wave or a finite wave packet: periodic oscillation is not required. In vacuum the disturbance travels at the speed of light. A receiver responds to fields arriving now from an earlier source event, as expressed by retarded time. This is how electrical activity at one place can deliver energy and information elsewhere without a connecting wire.

Stored electromagnetic energy alone does not establish outgoing electromagnetic radiation. A stationary electric charge in electrostatics, or a steady localized electric current in magnetostatics, can store electromagnetic energy with zero Poynting vector. Static combinations can have circulating energy flux without net outward power. Near a changing source, reactive energy can return later. The near and far field distinction separates these contributions from outgoing radiation zone fields.^[ref]

A single traveling vacuum plane electromagnetic wave obeying the Maxwell equations has $\mathbf{B}=\hat{\mathbf{k}}\times \mathbf{E}/c$. Its Poynting vector gives the energy density and flux of a plane electromagnetic wave:Here $I$ is wave intensity; ${ϵ}_0$ and ${\mu }_0$ are vacuum permittivity and vacuum permeability. For a monochromatic wave with linear polarization and peak amplitude $E_0$, squared cosine averages to $1/2$. Pulses require the instantaneous Poynting vector; arbitrary incident-and-reflected superpositions need not obey this relation.^[ref]

The electromagnetic momentum density is $\mathbf{g}=\mathbf{S}/c^2$. Completely absorbing a unidirectional vacuum pulse of energy $U$ transfers momentum $U/c$; see radiation pressure on a perfectly absorbing surface. A calculated $1.0\mathrm{mJ}$ pulse transfers $3.34\times 10^{-12}\mathrm{kg}m/s$. Symmetric emission can lose energy without net recoil because opposite momenta cancel.^[ref]

The direction of emission matters as much as its total power. For an oscillating electric dipole moment along $z$, the angular distribution of electric dipole radiation is strongest across the axis and vanishes along it. Its origin is geometric: the electric dipole radiation field is the transverse projection of the second time derivative of the electric dipole moment, so its magnitude contains $\sin \theta$. Squaring this electric field to obtain wave intensity gives ${\sin }^2\theta$. The electric-dipole approximation for radiation requires a source much smaller than its wavelength and observation in the radiation zone. ^[ref]

For example, the power per solid angle at $\theta =30^{\circ }$ is one quarter of its equatorial value, while the electric field amplitude is one half. To normalize the angular distribution to total power, use spherical coordinates with $d\Omega =\sin \theta d\theta d\varphi$:The integral follows by substituting $x=\cos \theta$, giving ${\int }_{-1}^1(1-x^2)dx=4/3$. This is a probability-like normalization over direction, with units of inverse steradian; it does not make the dipole an isotropic radiator. The same angular integral underlies the Larmor formula for nonrelativistic accelerated electric charge.

Detection requires the incident electromagnetic field to do something observable. An antenna develops an electrical response; a thermopile converts absorbed energy into a thermal and then electrical signal; a photodetector can respond through photon absorption. Hertz spark transmission and detection experiment makes this conversion visible as a tiny spark. Detector orientation, sensitivity, and surrounding reflections all matter: failure to see a signal does not prove that no electromagnetic radiation reached the receiver.

Electromagnetism describes how electric charge and electric current interact through the electric field $\mathbf{E}$ and magnetic field $\mathbf{B}$. The Maxwell equations describe the fields and their sources; the Lorentz force describes the response of a particle of electric charge $q$ and velocity $\mathbf{v}$:The electric field can change the particle's energy. The magnetic part of the Lorentz force is perpendicular to velocity, so magnetic forces do no work; they can bend a trajectory. These are local interactions: a particle responds to the electromagnetic field at its position. ^[ref].

The remarkable unification is that the same Maxwell equations connect Coulomb's law, Faraday's law of induction, and freely propagating electromagnetic waves. A changing electric field contributes to magnetic circulation through displacement current; together with Faraday's law, this permits waves in vacuum without conducting matter. The Poynting theorem then explains how the fields store and transport energy. This connects the force on a charge to the energy carried by light.

In his 1865 paper, James Clerk Maxwell derived transverse disturbances and compared the propagation speed inferred from electrical measurements with independently measured light speeds. Part VI, especially §§95–97, argues that their agreement supports identifying light as an electromagnetic wave. This was a comparison with finite experimental accuracy, rather than a numerical identity between the historical measurements. ^[ref]; ^[ref].

An electrometer measures small electric potential differences or electric charges while drawing very little electric current. The conducting-pail experiment in electric charge uses a voltage response to infer electric charge with a fixed effective capacitance.

Electromotive force is the driving work per unit electric charge around an electrical circuit, measured in volts, despite its name containing "force". For a stationary loop its electromagnetic contribution is $\mathcal{E}={\oint }_C\mathbf{E}\cdot d\mathbf{l}$; for a moving electrical conductor, include the motional electromotive force. A nonzero closed-loop line integral of the electric field cannot be represented by a single-valued electric potential alone. An electromotive force specifies the drive; the resulting electric current also depends on the electrical resistance and self-inductance. ^[ref].